Rigel 377
Electrosurgical Analyzer
- IEC 60601-2-2 compliant
- Power distribution from 10-5100Ω
- HF leakage test
- Return plate security test (Rem)
Rigel 377 Electrosurgical Analyzer
The Rigel 377 electrosurgical analyzer is a high performance electrosurgical analyzer with the emphasis on speed and ease of testing all modern day electrosurgical generators.
Utilising a high resolution low-inductance load bank, the Rigel 377 electrosurgical analyzer can measure high frequency leakage and power distribution down to 10ohm resolution whilst problems with the patient plate can be simulated to a 1ohm resolution.
Boosting a large colour screen, the Rigel 377 electrosurgical analyzer displays connection diagrams, program settings, power curves, alarm settings, data management and data analyzes.
Featuring Bluetooth connectivity, test data can be stored within the instrument and printed wirelessly to the rugged battery operated Elite Test and Tag printer or downloaded to Rigel’s Med-eBase software.
Ask a question about this productRigel 377 Electrosurgical Analyzer
Technical Specification:
| Power Measurement | |
|---|---|
| Power Measurement | True RMS value of applied waveform |
| Power Rating | 0 – 500W (RMS) |
| Duty Cycle | 100% 0-250W, 50% >250W |
| Accuracy | ±1W or 5% of value |
| Voltage (Peak) | 0 – 10KV (Peak) – Closed load only |
| Accuracy | ±10% of value. Measurement is taken between the active and dispersive electrodes with closed load only. |
| Voltage (RMS) | 0 - 500V |
| Accuracy | ±2V or 2% of value |
| Current | 0 – 2200mA |
| Accuracy | ±10mA or 2% of value |
| Crest Factor | 1.4 – 20 (Vpeak / V RMS) The higher of the two peak voltage measurements is used for calculation |
| RMS Bandwidth | |
|---|---|
| Instrumentation Only | 30 Hz to 10 MHz (-3 dB) |
| With Loads | 30 Hz to 2.5 MHz (-3 dB) |
| Variable Loads | 10 – 5100Ω, steps @ 10Ω (510 steps) |
| Accuracy | 1% of R |
| Load Array | Ceramic Resistors (Non inductive) |
| Measurement Delay | Foot switch delay selectable between 200 – 5000mS (10m Sec resolution) |
| RF Leakage (High Frequency Leakage) | |
|---|---|
| Active | From active part to earth |
| Passive | From plate – receptacle – to earth |
| Load | Variable see Power Measurement Fixed 2 x 200Ω / 250 Watt each |
| Remote Electrode Monitoring | |
|---|---|
| Range | 0 - 500Ω, steps @ 0.5Ω steps Motor driven potentiometer |
| Alarm Register | High and low, manual confirmation |
| Ranging | Manual or automatic |
| Output Connectors | |
|---|---|
| Remote Foot Switch Control (CUT) | 2 x 4 mm - yellow, Single relay contact |
| Remote Foot Switch Control (COAG) | 2 x 4 mm - blue, Single relay contact |
| High Frequency Leakage | 1 x 4 mm - black (common), 2 x 4 mm - red |
| Variable Load Output | 2 x 4mm (for power measurement) Red = Active, Black = Plate |
| Fixed Load Input | 3 x 4 mm (3 x Blue) (200Ω / 500W) |
| USB | PC Download / Future PC software |
| Oscilloscope Output | 5V/A, 100mA RF current minimum input |
| Isolation | 10kV Isolation between measurement device and enclosure |
| Low Frequency Filter | 100 Hz filter to avoid low-frequency disturbance or interference |
| Storage and Recall | |
|---|---|
| Memory | Approx 5,000 records |
| Output | CSV format |
| General Specifications | |
|---|---|
| Dimensions | 370 X 300 X 204mm |
| Weight | 7 KG |
| Operating Temperature | 15 °C to 35 °C |
| Storage Temperature | 0 °C to 50 °C |
| Mains Power | 115/230 VAC; 48 to 66 Hz, 35 VA |
| Part Numbers | |
|---|---|
| 367A910 | UK (13A) |
| 367A912 | Schuko (16A) |
| 367A915 | USA (15A-120V-60Hz) |
Rigel 377 Datasheet
