Checkbox 16 Instrument Checker
The Checkbox 16 is a convenient Installation Instrument Check Point. It is a versatile compact instrument which is designed to provide a convenient check point for installation test instruments including Ground Loop testers, Insulation Continuity Testers and GFCI testers. The CHECKBOX 16 provides a convenient and simple method of confirming the functionality and accuracy of Installation tester readings as required for NICEIC inspections.
Unless a user has confidence in their instrumentation they are of little value and the results generated are of little use. Under laboratory conditions it is often possible to cross reference between instruments and confirm readings, however installation instruments are often used in the field and this option is rarely available.
The CHECKBOX 16 is not designed to be the basis of a complete calibration system but it does offer precision test points for a wide variety of instruments and enables the user to confirm the accuracy of their instrumentation whenever required.
The NICEIC has introduced into its assessment procedure a check to ensure the functionality and/or accuracy of test instruments. If an Approved Contractor is unable to demonstrate that an effective control system is in place to ensure the accuracy of test instruments, the Inspecting engineer will record a non-compliance in the Assessment Report.
The Checkbox 16 can be an important part of an effective control system as defined by the NICEIC.
The Checkbox 16 checks all Seaward and most other manufacturer's Installation Test Instruments.
Unless a user has confidence in their instrumentation they are of little value and the results generated are of little use. Under laboratory conditions it is often possible to cross reference between instruments and confirm readings, however installation instruments are often used in the field and this option is rarely available.
The CHECKBOX 16 is not designed to be the basis of a complete calibration system but it does offer precision test points for a wide variety of instruments and enables the user to confirm the accuracy of their instrumentation whenever required.
The NICEIC has introduced into its assessment procedure a check to ensure the functionality and/or accuracy of test instruments. If an Approved Contractor is unable to demonstrate that an effective control system is in place to ensure the accuracy of test instruments, the Inspecting engineer will record a non-compliance in the Assessment Report.
The Checkbox 16 can be an important part of an effective control system as defined by the NICEIC.
The Checkbox 16 checks all Seaward and most other manufacturer's Installation Test Instruments.
Related Products
Portable Tester Accessories
Customer Comments
No comments have been made about this product. Be the first to let us know what you think.Key Features
- Compliance with NICEIC recommendations.
- Tests most manufacturers 16th Edition instruments.
- Continuity check.
- Insulation check.
- Test Voltage.
- RCCB Test.
- Voltage measurement.
Downloads
There are no downloads currently available for this product.Technical Specification
Tests Performed
- Continuity check against precision 1ohm and 10ohm.
- Insulation check against precision 1Mohm.
- Ground Loop Impendance/Resistance check against 5ohm.
- GFCI 60mS Trip Time and 30mA test current check.
- Voltage measurement check 45 — 85v a.c. specific value for each unit.
General
- Powered from mains 120V 60Hz.
- Weight: 1 lb.
- Dimensions: 7.1" x 1.8" x 3.9".
Knowledge Base
Product Matrix
The Product Matrix allows you to compare the features of up to 5 products. Simply check the box next to the products you wish to compare then select the 'Compare Products' button.Product Enquiry
Site engineered by NorthBloc