- Other Seaward Sites:
The DO8000 is the ideal measuring instrument for transformer and other inductive windings. The advanced power supply ensures that measurements are fast and stable. The two measuring channels permit both primary and secondary windings to be measured and displayed at the same time, and with the addition of the internal timer and data logger cooling curves can be measured without problems.
| Wide Measuring Range The long scale length 20000 count combined with its wide memory range enables the DO8000 to tackle the most demanding tasks with ease. The resolution is 0.1 micro ohm on the lowest range and the maximum reading is 2,000 ohm. |
 |
| Data Logging The DO8000 has the ability to store over 100 files each with over 120 measurements, these are stored in text files which are compatible with spreadsheets. |
|
| High Accuracy Large LCD Display The measuring accuracy ±0.25% ensures the highest quality of measurement. The colour display shows all the relevant measurement details including measurement current, ranges transformer tap etc. |
|
| Measuring Current The measuring current may be selected independently for each measuring channel, a robust constant current power supply is employed to ensure that transformer cores are quickly and efficiently saturated. |
|
| Measurement timer A timer is incorporated which may be used to automatically take and store measurements at set time intervals ensuring cooling curve measurements are taken with maximum efficiency |
|
| Interface Options For those wishing to automate their resistance measurements . The RS232 and USB interfaces are fully talk/listen. A tap change output is also provided. |
| Printer A panel printer is included and all test data may be sent to the printer via a single print/dump button |
|
|
 |
True 4 measurement eliminates lead resistance errors |
|
|
|
Wide measuringe range 0.1 milliohms to 2 kilohms |
|
|
|
Resolution 0.1 microhms on 2 milliohm range |
|
|
|
High accuracy 0.25% rdg + 0.25% fs |
|
|
|
2 channel measurement for primary and secondary windings |
|
|
|
Data logging with large colour alpha numeric storage for test results |
|
|
|
Robust power supply for fast testing of large power transformers |
|
|
|
Open circuit limit mode 20mV / 50mV maximum |
|
|
|
Interface RS232 and USB |
| Measurement | 4 wire eliminates lead resistance |
| Display | LCD Graphics colour lcd display visible in bright sunshine |
| Ranges | Manual / Automatic independently selectable for each measuring channel |
| Protection | Protected from overvoltage transients & substation noise, High speed current interrupt detector, audible warning during and after test, emergency stop button |
| Systems Interface | RS232 and USB ports |
| Terminals | 4 mm safety sockets |
| Environmental | Operating temperature -10°C ... +50 °C Storage temperature -15°C ... +80 °C Relative humidity 0...90%, non-condensing |
| Memory | Over 100 files with over 120 measurements each in text files that are compatible with most spreadsheet formats |
| Mains Supply | 90 to 132Vac 50/60Hz, 198 to 256Vac 50/60Hz 550VA max |
| CE compliance | EN61010 EN61326 |
| Dimensions | 47 x 36 x 18 cm |
| Weight | 25 lbs. (11.4 kg) |
| Accessories | Supplied with RS232 and USB interface, mains cord, handbook, application software and certificate of conformity |
