Cropico DO5000-CS

Calibration standard for DO5000

True 4 terminal standards
Switch selectable values
Polarity Reversal switch

Four terminal zero
PT100 calibration
Upto 10A calibration current

Overview Specification

Cropico DO5000-CS Calibration Standard

The calibration Standard DO5000-CS is designed to enable the full calibration of the Digital microhmmeter type DO5000, The resistance ranges are adjusted to a nominal accuracy and the actual value is measured and recorded on the calibration certificate. The value on the calibration certificate is the value that should be used when calibrating the DO5000.

Ask a question about this product

Technical specification

Measurement	4 wire eliminates lead resistance
Display	LCD Graphics panel with backlight 30,000 count
Ranges	Manual / Automatic
Auto Zero	Value Average Hold
Systems Interface	RS232 fitted as standard, IEEE-488, PLC option
Terminals	4mm safety sockets
Working Temperature	0°C ... 45°C
Storage Temperature	-10°C...+60 °C
Mains Supply	230V ±10%, 115 V ±10% 47...63Hz
Safety	IEC 1010 Class 1
Dimensions	339 x 324 x 131 mm (W D H)
Weight	8.5kg
Accessories	Supplied with RS232 interface, mains cord, handbook and certificate of conformity

Resistance ranges

Range	Resolution	Min. Current	Max. Current	Accuracy at full rated current
30kOhm	1Ohm	10mA	100mA	±(0.03% Rdg +0.02% FS)
3kOhm	100mOhm	100mA	1mA	±(0.03% Rdg +0.01% FS)
300Ohm	10mOhm	1mA	10mA	±(0.03% Rdg +0.01% FS)
30Ohm	1mOhm	10mA	100mA	±(0.03% Rdg +0.01% FS)
3Ohm