• Other Seaward Sites:

Rigel 266 Plus Electrical Safety Analyzer

Rigel 266 Plus Electrical Safety Analyzer

Easy to Use Medical Safety Analyzer

 

The Rigel 266 Plus is a highly compact, easy-to-use medical electrical safety analyzer, designed to test in accordance with IEC/EN 60601-1, MDA DB9801, and AS/NZ 3200.

In addition to the Semi Automatic test, the Rigel 266 Plus provides fully manual test routines, easily selectable via the rotary selector switch and dedicated push buttons for individual Single Fault Conditions. A sequence of leakage measurements can be selected without requiring a power break, providing a quick test solution for medical equipment requiring a power-up / down delay time.

A large LCD display provides clear indication of test results, Single Fault Condition, AC or DC measurements and pass/fail limits.

With its compact design and full IEC 60601-1 features, the Rigel 266 Plus provides the user with a highly effective and portable test solution.

 

25A AC earth bond

Portable

Manual SFC

 

Related Products

Appliance Service and Tool Rental test equipment

 

Customer Comments

No comments have been made about this product. Be the first to let us know what you think.

Knowledge Base

You must be registered to view Knowledge Base articles related to this product. Please register or log-in to view these articles.

Key Features

  • Lightweight and Portable
  • Choice of 25A, 10A and 1A (AC) ground bond currents
  • Full manual control of Single Fault Condition
  • Semi Automatic testing
  • Intuitive rotary switch operation
  • Large easy view display
  • User controllable power UP / DOWN
  • 500VDC insulation test
  • IEC lead test
  • Connects to an optional mini printer

Included with the Rigel 266 Plus:

  • Rugged carry case      
  • RS 232 for real time download into PC / Laptop*
  • Ground Bond Probe
  • Applied parts harness including Applied Parts Adaptors

* PC / Laptop must be isolated from earth

 

Downloads

There are no downloads currently available for this product.

Technical Specification

Ground Continuity

Current - 1, 10 and 25 Amps
Max test Voltage - 6V rms o/c
Range - 0 – 19.99 ohm
Accuracy - +/- 5% of value, +/- 2 digit

Insulation Resistance (EUT & EUT/Applied parts)

Voltage - 500 V DC @ 1mA
O/C Voltage - <750V
Range - 100K – 20M ohm +/- 5% +/- 2 digits
             20M – 100M ohm +/- 10% +/- 2 digits
Resolution - 0.01M ohms

Leakage (Ground/Enclosure/Applied parts/Patient leakage/Patient leakage F-type/ Patient leakage mains on signal input of signal output)

True rms
Ability to measure AC & DC separately
Input Impedance - > 1M ohm
Frequency Response - DC to 1 MHz (-3 dB)
Range - 20uA, 100uA, 200uA, 1mA, 2mA, 10mA
Accuracy - +/- 5%, +/- 2 counts
Mains on Applied Part Voltage 110% of mains voltage, Mains on Signal Input or Signal Output 110% of mains voltage.
Applied Parts/Patient Lead selection for: none, 1, 2, 3, 4, 5, All.

Power Measurement

Range - 0.1 KVA- 4 KVA
Accuracy - +/- 10% of Reading +/- 5 digit

Polarity

IEC Lead Test. Automatically test for live and neutral reversed, neutral open, earth open and combinations of these.

User Interfaces

Rotary Switch - 12 position
Keyboard - 11 key rubber
Display - Large format Custom LCD

Weight

8.8 lbs.

Dimensions

12.2" x 8.3" x 3.2"

Knowledge Base

Product Matrix

The Product Matrix allows you to compare the features of up to 5 products. Simply check the box next to the products you wish to compare then select the 'Compare Products' button.

Product Enquiry

Contact Information

indicates required field
Title*
Please type in the validation code from the image (case sensitive).

Additional Information (optional)

 
Site engineered by NorthBloc   
© 2008, Seaward Electronic Group Ltd. All rights reserved.